Negotiable
The date of payment from buyers deliver within days
Beijing
Long-term effective
2023-03-03 06:05
69
Company Profile
Wuxi J&R Roll Former Co., LtdBy certification [File Integrity]
Contact:wxjinrui(Mr.)
Email:
Telephone:
Phone:
Area:Beijing
Address:Beijing
Website:http://www.jrrollformingmachine.com/ http://wxjinrui.easylink-lighting.com/
Introduction
This roof sheet roll forming machine can efficiently produce steel roof or wall panels, so it can be widely used in factories, warehouses, office buildings, cold storage, shops, kiosks, temporary housing and other fields. It is equipped with high-performance manual uncoiler, guiding device, roll forming system, cutting device, hydraulic system, PLC control system, etc. to ensure the efficient operation of the whole process. The rollers are made of high quality steel and are surface polished and chrome plated for wear and corrosion resistance. In addition, this machine has major components from several well-known manufacturers, which further ensure long life and stability. If you have your own ideas about the size, specification and layout of the machine, welcome to contact us for customized service at any time.
Details
1. The uncoiler can help the steel coil to be uncoiled automatically. Its inner diameter is 450-508mm and the load capacity is 5T.
2. The guide rod and slider can inform the width and position of the steel plate, and the pre-cut knife can cut the plate before forming to save material.
3. The cutting blade is powered by a hydraulic station, and its material is Cr12 quenched, and there is no waste after cutting.
4. The PLC control system is very easy to operate and use, and it has two calculation modes: automatic and manual.The operator can adjust the production parameters of the roof sheet roll forming machine through this system.
1. Machine Specifications
1 |
Coil Type |
Pre-painted coil, Galvanized steel or G500 G550 |
||||
2 |
Width |
1220mm or as per client's request |
||||
3 |
Thickness Range |
0.2-1mm |
||||
4 |
Effective width |
1050mm or as per drawing |
||||
1 |
Power Requirement |
Voltage |
(380V 50HZ), or according client require |
|||
Main Motor power |
5.5kw as per sheet thickness |
|||||
Cutter power |
5.5kw as per sheet thickness |
|||||
2 |
Forming speed |
10-15m/min |
||||
3 |
Forming stations |
13 rows, as per finial machine |
||||
4 |
Main Frame |
300H beam |
||||
5 |
Sidewall thickness |
14mm |
||||
6 |
Forming shaft diameter |
70mm 0.01mm-0.03mm (Grinding) |
||||
7 |
Chain |
1inch chain drive or as per design |
||||
8 |
Type of cutting |
Roll formed and length-set cutting |
||||
9 |
Control system |
PLC control |
||||
10 |
Install dimension (depend on the final design) |
7.4m 1.5m 1.3m |
||||
11 |
Total weight (Approx) |
3.5T |
||||
12 |
Roller material |
High grade 45# steel, hard chrome plated |
||||
13 |
Feeding system |
Guide type |
||||
14 |
Cutting blade |
Cr12 |
||||
15 |
Frequency changer |
Delta |
2. Process Drawing
http://www.jr-rollformingmachine.com/